Built for water + electricity.

Tank Commander sits between AC mains and your aquarium. We take that seriously. Every unit ships with multiple layers of protection — most of which you'll never notice unless something goes wrong.

Certifications

• UL 1310 / IEC 62368-1 (in progress)
• FCC Part 15 Class B
• RoHS, CE

Built-in protections

• Leak detection: immediate audible alarm + outlet cut-off when the floor probe registers water.
• Stray voltage monitoring: reads tank-to-ground AC on every outlet. Faults isolated to the offending outlet.
• GFCI advisory: we strongly recommend a dedicated GFCI on the wall outlet upstream. Tank Commander does not replace one.
• Overload protection: resettable thermal breaker on the AC input. Per-outlet current monitoring.

Install best practices

1. Mount above the waterline; use the drip loop on every cord.
2. Plug into a GFCI-protected wall outlet. Replace if you don't have one.
3. Test the leak probe on day one — pour a teaspoon of tank water on it.
4. Update firmware monthly. We patch safety bugs first.

This page is informational and is not a substitute for an electrician when installing new circuits. If anything looks wrong, unplug first and ask later.